Kurz 410FTB, Operation Manual

Page: 78 / 165

Kurz B ‐ Series Operations Guide 4–5
Program Mode Advanced Setup
DUCT PROFILE
>ROUND
^
v
The duct profile options are round, rectangle, and custom.
8>
Use the arrow keys to select the duct profile, and then press E .
Depending on the duct profile selection, the duct width, inside diameter, or flow area
prompt appears.
Rectangle duct profile
DUCT WIDTH
>36.25 IN
DUCT Height
>40.625 IN
Round duct profile
INSIDE DIAMETER
>15.325 IN
Custom duct profile
FLOW AREA
>10.525 SQFT
9>
Use the number and decimal keys to enter the profile measurements or flow area. Press E .
FLOW AREA
>10.525 SQFT
The Flow Area is calculated from the height and width of a rectangular profile or the
inside diameter of a round profile.
Note: If you selected a custom duct profile, the Flow Area option will not
appear twice.
10>
Use the number and decimal keys to enter the insertion depth measurement. Press E .
For insertion flow meters, the Probe Depth option appears. The insertion depth is
measured from the probe tip to the inside duct wall along the probe support.
PROBE DEPTH
>18.230 IN
11>
Use the number and decimal keys to enter the probe depth. Press E .