Kubota ME5700, Workshop Manual

Page: 80 / 508

ME5700, WSM GENERAL
G-63
(2) Rear Wheels
Rear tread width can be adjusted as shown with the standard equipped tires.
To change the tread width
A
When working on slopes or working with trailer, set the
wheel tread as wide as practical for the job for maximum
stability.
A
Always attach tires as shown in the drawings.
A
If not attached as illustrated, transmission parts may be
damaged.
A
When re-fitting or adjusting a wheel, tighten the nuts to
the following torques then recheck after driving the
tractor 200 m (200 yards) and thereafter daily check
service.
1. Remove the wheel rim and / or disk mounting bolts.
2. Change the position of the rim and / or disk (right and left) to the desired position, and tighten the bolts.
0000002363E
Tightening torque
Rear wheel mounting
nut and rear disc
mounting nut 260 to 304
26.5 to 31.0
192 to 224 ft-lbs
ME5700
14.9R28
1320 mm
(52.00 in.)
1420 mm
(55.9 in.)
1520 mm
(59.8 in.)
1620 mm
(63.8 in.)
1720 mm
(67.7 in.)
420/
85R28
1410 mm
(55.5 in.)
1520 mm
(59.8 in.)
1620 mm
(63.8 in.)
16.9R28
1420 mm
(55.9 in.)
1520 mm
(59.8 in.)
1620 mm
(63.8 in.)
1720 mm
(67.7 in.)
(1) Rear Wheel Disc (2) Rear Wheel Rim (3) Rear Wheel Mounting Nut and (A) Tread
Rear Disc Mounting Nut
0000003115E
KiSC issued 04, 2006 A