Kubota ME5700, Workshop Manual

Page: 504 / 508

ME5700, WSM CABIN
10-S49
2) Rear Wiper Switch
1. Check the continuity through the switch with an ohmmeter.
2. If continuity specified below is not indicated, the switch is
faulty.
Rear Wiper Motor
1. Raise up the rear wiper arm (1).
2. Turn the main switch ON.
3. Push the rear wiper switch to ON position.
4. Count the number of wiper arm rocking per minutes.
5. If the number differs from the factory specifications, replace
the wiper motor (3) assembly.
(2) Disassembling and Assembling
Preparation
1. Prepare the followings.
A
Cutter knife 1 piece
A
Scraper 1 piece
A
Gun for coating 1 piece
A
Sika Tack-Ultrafast or equivalent
A
Sika-cleaner No. 1
A
Gummed tape
A
Sika Tack-Ultrafast and cleaner No. 1 are made by Sika
Corporation.
A
These materials can't be provided by Kubota Corporation.
A
Therefore, please find the local made equivalent materials
in your country and use them when you need.
Terminal
Position
-S +1 B W -
Front wiper
switch
WASH I
OFF
ON
WASH II
(1) Rear Wiper Switch (2) Rear Wiper Switch Connector
(Switch Side)
0000002238E
No. of wiper arm swing
frequency at no load
Factory spec. 36 to 50 times / min.
(1) Wiper Arm (3) Wiper Motor
(2) Wiper Blade
0000002239E
(A) Cab Windshield
0000002241E
KiSC issued 04, 2006 A