ME5700, WSM
HYDRAULIC SYSTEM
8-S25
Removing Gerotor
1. Secure the housing (3) in a vise and remove seven gerotor
mounting screws and gerotor assembly (1).
2. Remove the distributor plate (11) and drive shaft (2).
3. Remove the rotor (9), O-ring (5) between the distributor plate
and stator (6).
4. Take out the spacer ring (10) and spacer (7).
5. Remove the O-ring (8) from the rotor (9).
(When reassembling)
1. Fit an O-ring into the groove of the end cap (4), insert 2 or 3
bolts.
2. Fit an O-ring into the groove of the stator (6), and put it on the
end cap, with the O-ring upward.
3. Apply clean transmission fluid (specified fluid) to the rotor (9),
fit an O-ring (8) into the groove of the rotor and put the spacer
on it. Keeping the spacer on the rotor, fit it into the stator (6)
with the spline bevelled side upward.
4. After putting the spacer into the rotor (9) insert the splines of
drive shaft (2) into the rotor (9), aligning the direction of drive
shaft pin groove (12) with the rotor tooth bottom (13).
5. Fit an O-ring into the groove of the housing (3).
Fit the pin groove of the drive shaft (2) to the dowel pin inside
the housing
A
Be sure to align the direction of the drive shaft pin groove
(12) with the rotor tooth bottom (13).
Tightening torque
Gerotor assembly
mounting screw (5/16')
25.5 to 28.4
2.6 to 2.9
18.8 to 21.0 ft-lbs
(1)
Gerotor Assembly
(8)
O-ring
(2)
Driven Shaft
(9)
Rotor
(3)
Housing
(10)
Spacer Ring
(4)
End Cap
(11)
Distributor Plate
(5)
O-ring
(12)
Direction of Pin Groove
(6)
Stator
(13)
Rotor Tooth Bottom
(7)
Spacer
(14)
Ball
0000001227E
KiSC issued 04, 2006 A
Summary of Contents for ME5700
