Kubota ME5700, Workshop Manual

Page: 497 / 508

ME5700, WSM CABIN
10-S42
Air Mixing Door Control Cable (Blue Cable)
1. Disconnect the air mixing door control cable (3) from the
damper lever (1) of air conditioner control panel side.
(When reassembling)
A
Set the damper lever (1) of the air conditioner unit at MAX
HOT position. Reconnect the cable.
A
Move the control to MAX HOT position. Fit the inner cable in
position, and press the fix the outer cable by the cable clip (2)
in the direction of arrow (A) as shown at left.
A
Move the temperature control lever several times, and finally
set it to MAX HOT position to make sure the damper lever is
at HOT position too.
A/C Mode Door Control Cable (Yellow Cable)
1. Disconnect the air conditioner mode door control cable (3)
from the def. control lever (1) of A/C control panel side.
(When reassembling)
A
Set the air conditioner unit to DEF mode position and
reconnect the cable (3).
A
Set the control at DEF position. Fit the inner cable in position,
and press and fix the outer cable by the cable clip (2) in the
direction of arrow (B) as shown at left.
A
Move the mode lever several times and finally set it to DEF
position to make sure the air conditioner unit is at DEF mode
position.
A
Lay and fix the mode door control cable over the water valve
cable.
(1) Damper Lever A : Direction of Pulling Outer
(2) Cable Clip Cable
(3) Air Mixing Door Control Cable
0000002215E
(1) DEF. Control Lever B : Direction of Pushing Outer
(2) Cable Clip Cable
(3) Mode Door Control Cable
0000002216E
KiSC issued 04, 2006 A