Kubota ME5700, Workshop Manual

Page: 66 / 508

ME5700, WSM GENERAL
G-49
Rear Axle Cover Puller
Code No : 07916-51041
Application : Use for removing a rear axle cover from rear axle.
Shuttle Clutch Compression Tool
Code No. : 07916-55031
Application : Use exclusively for pushing the thrust collar,
remove the external snap ring.
A
Replace the center guide (1) for shown in figure.
0000003139E
A 20 mm dia. (0.79 in. dia.)
B 11.5 mm dia. (0.45 in. dia.)
C Chamfer 1 mm (0.04 in.)
D 6 mm (0.24 in.)
E 15 mm (0.59 in.)
F 20 mm (0.79 in.)
G Weld all around
H 6 mm (0.24 in.)
I M4 x 0.7
J 28 mm (1.1 in.)
K 8 mm (0.31 in.)
L 5 mm (0.2 in.)
M 67 mm dia. (2.64 in. dia.)
N 73.5 mm dia. (2.89 in. dia.)
O 76 mm dia. (3.27 in. dia.)
P 83 mm dia. (3.27 in. dia.)
Q 25 mm (0.98 in.)
R 35 mm (1.38 in.)
S 20 mm (0.79 in.)
T M8 x 1.25
(1) Center Guide
0000002344E
KiSC issued 04, 2006 A