ME5700, WSM
ENGINE
1-S49
Camshaft Alignment
1. Support the camshaft with V blocks on the surface plate at
both end journals.
2. Set a dial indicator with its tip on the intermediate journal.
3. Measure the camshaft alignment.
4. If the measurement exceeds the allowable limit, replace the
camshaft.
Camshaft Side Clearance
1. Set a dial indicator with its tip on the camshaft.
2. Measure the side clearance by moving the cam gear to the
front and rear.
3. If the measurement exceeds the allowable limit, replace the
camshaft stopper.
Cam Height
1. Measure the height of the cam at its highest point with an
outside micrometer.
2. If the measurement is less than the allowable limit, replace the
camshaft.
Oil Clearance between Idle Gear Shaft and Idle Gear Bushing
1. Measure the idle gear shaft O.D. with an outside micrometer.
2. Measure the idle gear bushing I.D. with an inside micrometer,
and calculate the oil clearance.
3. If the oil clearance exceeds the allowable limit, replace the
bushing.
If it still exceeds the allowable limit, replace the idle gear shaft.
Camshaft alignment
Allowable limit
0.01 mm
0.0004 in.
0000000891E
End play of camshaft
Factory spec.
0.07 to 0.22 mm
0.0028 to 0.0087 in.
Allowable limit
0.30 mm
0.0118 in.
0000002093E
Cam height of intake
and exhaust
Factory spec.
33.463 to 33.483 mm
1.31744 to 1.31823 in.
Allowable limit
33.42 mm
1.3157 in.
0000002505E
Oil clearance between
idle gear shaft and idle
gear bushing
Factory spec.
0.025 to 0.066 mm
0.00098 to 0.00260 in.
Allowable limit
0.10 mm
0.0039 in.
Idle gear shaft O.D.
Factory spec.
37.959 to 37.975 mm
1.49445 to 1.49508 in.
Idle gear bushing I.D.
Factory spec.
38.000 to 38.025 mm
1.49606 to 1.49704 in.
0000002506E
KiSC issued 04, 2006 A
Summary of Contents for ME5700
