Kubota ME5700, Workshop Manual

Page: 117 / 508

ME5700, WSM ENGINE
1-S23
Separating Engine and Clutch Housing
1. Remove the muffler (9).
2. Remove the delivery pipes (6) and suction pipe (7).
3. Disconnect the hour meter cable (3).
4. Remove the stop solenoid cover (4).
5. Disconnect the engine stop cable (5).
6. Remove the power steering pipes (8).
7. Remove the power steering controller (10).
8. Disconnect the accelerator wire (2).
9. Disconnect the fuel blazer hoses.
10. Remove the bonnet support (1).
11. Hoist the engine by the hoist and chain.
12. Remove the engine mounting screws and nuts, then separate
the engine from the clutch housing.
(When reassembling)
A
Apply molybdenum disulphide (Three Bond 1901 or
equivalent) to the splines.
A
Apply liquid gasket (Three Bond 1141, 1211 or equivalent) to
joint face of the engine and clutch housing.
(E) Separating Engine (CABIN Type)
Tightening torque
Delivery pipe retaining
nut
107.9 to 117.7
11.0 to 12.0
79.6 to 86.8 ft-lbs
Hydraulic pipe mounting
screw
17.7 to 20.6
1.8 to 2.1
13.0 to 15.2 ft-lbs
Power steering pipe
retaining nut
47.1 to 51.0
4.8 to 5.2
34.7 to 37.6 ft-lbs
Engine and clutch
housing mounting screw
and nut 77.5 to 90.2
7.9 to 9.2
57.1 to 66.5 ft-lbs
(1) Bonnet Support (6) Delivery Pipe
(2) Accelerator Wire (7) Suction Pipe
(3) Hour Meter Cable (8) Power Steering Pipe
(4) Stop Solenoid Cover (9) Muffler
(5) Engine Stop Cable (10) Power Steering Controller
0000002439E
KiSC issued 04, 2006 A