ME5700, WSM
ENGINE
1-S55
Oil Clearance between Crankshaft Journal and Crankshaft
Bearing 2
1. Put a strip of plastigage (Code No. 07909-30241) on the
center of the journal.
2. Install the bearing case and tighten the baring case screws 1
to the specified torque, and remove the bearing case again.
3. Measure the amount of the flattening with the scale, and get
the oil clearance.
4. If the clearance exceeds the allowable limit, replace the
crankshaft bearing 2.
5. If the same size bearing is useless because of the crankshaft
journal wear, replace it with an undersize one referring to the
table and figure.
A
Be sure not to move the crankshaft while the bearing case
screws are tightened.
(Reference)
A
Undersize crankshaft bearing 2
A
Undersize dimensions of crankshaft journal
Oil clearance between
crankshaft journal and
crankshaft bearing 2
Factory spec.
0.040 to 0.104 mm
0.00157 to 0.00409 in.
Allowable limit
0.20 mm
0.0079 in.
Crankshaft journal O.D.
Factory spec.
51.921 to 51.940 mm
2.04413 to 2.04488 in.
Crankshaft bearing 2
I.D.
Factory spec.
51.980 to 52.039 mm
2.04645 to 2.04878 in.
Undersize
Bearing
Code Number
Marking
0.2 mm
0.008 in.
Crankshaft bearing 2
17331-23911
020 US
0.4 mm
0.016 in.
Crankshaft bearing 2
17331-23921
040 US
Undersize
0.2 mm
0.008 in.
0.4 mm
0.016 in.
Dimension A
2.8 to 3.2 mm radius
0.1102 to 0.1260 in. radius
2.8 to 3.2 mm radius
0.1102 to 0.1260 in. radius
Dimension B
1.0 to 1.5 mm dia.
0.0394 to 0.0591 in. dia.
1.0 to 1.5 mm dia.
0.0394 to 0.0591 in. dia.
Dimension C
51.721 to 51.740 mm dia.
2.03626 to 2.03700 in. dia.
51.521 to 51.540 mm dia.
2.02838 to 2.02913 in. dia.
(0.4-S)
The crankshaft journal must be fine-finished to higher than
0000002516E
KiSC issued 04, 2006 A
Summary of Contents for ME5700
