KTI Networks KGS-1064-HP User Manual Download Page 89

Page: 89 / 240

-89-

2.9 MVR

The

MVR

feature enables multicast traffic forwarding on the Multicast VLANs. In a multicast television

application, a PC or a network television or a set-top box can receive the multicast stream. Multiple set-top

boxes or PCs can be connected to one subscriber port, which is a switch port configured as an MVR receiver

port. When a subscriber selects a channel, the set-top box or PC sends an

IGMP

MLD

report message to

Switch A to join the appropriate multicast group address. Uplink ports that send and receive multicast data to

and from the multicast VLAN are called MVR source ports. It is allowed to create at maximum 8 MVR

VLANs with corresponding channel settings for each Multicast VLAN. There will be totally at maximum 256

group addresses for channel settings.

Configuration

Description (Example with MSTI1)

MVR Mode

Enable/Disable the Global MVR.

The Unregistered Flooding control depends on the current configuration in

IGMP/MLD Snooping. It is suggested to enable Unregistered Flooding control when

Summary of Contents for KGS-1064-HP

















































































































































































































































Search results

Summary of Contents for KGS-1064-HP

Reviews:

Related manuals for KGS-1064-HP

Brands by name

Popular brands

KTI Networks KGS-1064-HP, User Manual

Search results

Summary of Contents for KGS-1064-HP

Reviews:

Related manuals for KGS-1064-HP

Brands by name

Popular brands