KTI Networks KGS-1064-HP, User Manual

Page: 80 / 240

-80-
Configuration Description
Enable Loop Protection Controls whether loop protections is enabled (as a whole).
Transmission Time The interval between each loop protection PDU sent on each port. valid values are 1 to 10
seconds.
Shutdown Time The period (in seconds) for which a port will be kept disabled in the event of a loop is detected
(and the port action shuts down the port). Valid values are 0 to 604800 seconds (7 days). A
value of zero will keep a port disabled (until next device restart).
Port The switch port number of the port
Enable Controls whether loop protection is enabled on this switch port.
Action Configures the action performed when a loop is detected on a port. Valid values are
Shutdown Port , Shutdown Port and Log or Log Only .
Tx Mode Controls whether the port is actively generating loop protection PDU's, or whether it
is just passively looking for looped PDU's.
Save Click to save the changes.
Reset Click to undo any changes made locally and revert to previously saved values.
2.8 Spanning Tree
This section is used to set configuration for supporting Spanning Tree protocols including STP , RSTP , and
MSTP .