manualshive.com logo in svg

KTI Networks KGS-1064-HP, User Manual

The KTI Networks KGS-1064-HP is a high-performance network switch that offers seamless connectivity and efficient data transfer. Unlock the full potential of this powerful device with the comprehensive and user-friendly User Manual available for free download at manualshive.com. Discover all the features and functionalities hassle-free, just a few clicks away.

Share
Download
background image

-229- 

last listener for a multicast address or source. In IGMP, this term is called LMQI (Last 

Member Query Interval).   

LOC 

LOC is an acronym for Loss Of Connectivity and is detected by a 

MEP 

and is indicating lost 

connectivity in the network. Can be used as a switch criteria by 

EPS 

 

M   

MAC Table 

Switching of frames is based upon the DMAC address contained in the frame. The switch 

builds up a table that maps MAC addresses to switch ports for knowing which ports the frames 

should go to ( based upon the DMAC address in the frame ). This table contains both static 

and dynamic entries. The static entries are configured by the network administrator if the 

administrator wants to do a fixed mapping between the DMAC address and switch ports.   

The frames also contain a MAC address ( SMAC address ), which shows the MAC address of 

the equipment sending the frame. The SMAC address is used by the switch to automatically 

update the 

MAC table 

with these dynamic MAC addresses. Dynamic entries are removed from 

the MAC table if no frame with the corresponding SMAC address have been seen after a 

configurable age time. 

MEP 

MEP is an acronym for Maintenance Entity Endpoint and is an endpoint in a Maintenance 

Entity Group (ITU-T Y.1731).   

MD5 

MD5 is an acronym for Message-Digest algorithm 5. MD5 is a message digest algorithm, used 

cryptographic hash function with a 128-bit hash value. It was designed by Ron Rivest in 1991. 

MD5 is officially defined in RFC 1321 - The MD5 Message-Digest Algorithm.   

Mirroring 

For debugging network problems or monitoring network traffic, the switch system can be 

configured to mirror frames from multiple ports to a mirror port. (In this context, mirroring a 

frame is the same as copying the frame.)   

Both incoming (source) and outgoing (destination) frames can be mirrored to the mirror port. 

MLD 

MLD is an acronym for Multicast Listener Discovery for IPv6. MLD is used by IPv6 routers 

to discover multicast listeners on a directly attached link, much as IGMP is used in IPv4. The 

protocol is embedded in ICMPv6 instead of using a separate protocol.   

MSTP 

In 2002, the IEEE introduced an evolution of 

RSTP

: the Multiple Spanning Tree Protocol. The 

MSTP protocol provides for multiple spanning tree instances, while ensuring RSTP and STP 

compatibility. The standard was originally defined by IEEE 802.1s, but was later incorporated 

Summary of Contents for KGS-1064-HP

















































































































































































































































Reviews:

No comments

Related manuals for KGS-1064-HP

3Com OfficeConnect 5 Datasheet preview
OfficeConnect 5
Brand: 3Com Pages: 2
3Com OfficeConnect 3C1670500C User Manual preview
OfficeConnect 3C1670500C
Brand: 3Com Pages: 18
Waters Network Systems ES1008-MSC Operating Manual preview
ES1008-MSC
Brand: Waters Network Systems Pages: 16
3Com 3C63100-AC-C - PathBuilder S600... Reference Manual preview
3C63100-AC-C - PathBuilder S600...
Brand: 3Com Pages: 232
LAPP ETHERLINE ACCESS U04TP01T Hardware Installation Manual preview
ETHERLINE ACCESS U04TP01T
Brand: LAPP Pages: 16
Cabletron Systems DLEHF-MA User Manual preview
DLEHF-MA
Brand: Cabletron Systems Pages: 194
Leonton ET2-0602-M Series User Manual preview
ET2-0602-M Series
Brand: Leonton Pages: 17
Exsys EX-1195HMS Manual preview
EX-1195HMS
Brand: Exsys Pages: 14
3onedata IES6300PRO Series Quick Installation Manual preview
IES6300PRO Series
Brand: 3onedata Pages: 5
CONCORD CS4WH20B4KS-A Manual preview
CS4WH20B4KS-A
Brand: CONCORD Pages: 18
Unipoe P6-S20FL User Manual preview
P6-S20FL
Brand: Unipoe Pages: 6
PS Automation PSL 4 Installation Instructions preview
PSL 4
Brand: PS Automation Pages: 4
CYP CH-2537TXWPUS Operation Manuals preview
CH-2537TXWPUS
Brand: CYP Pages: 44
CYP CDPS-U42HPIP Operation Manuals preview
CDPS-U42HPIP
Brand: CYP Pages: 48
schmersal EX-AZ 3350 Series Operating Instructions preview
EX-AZ 3350 Series
Brand: schmersal Pages: 4
LevelOne GES-2451 Quick Installation Manual preview
GES-2451
Brand: LevelOne Pages: 14
LevelOne GEL-2060 Configuration Commands preview
GEL-2060
Brand: LevelOne Pages: 5
LevelOne FSW-1607TFX User Manual preview
FSW-1607TFX
Brand: LevelOne Pages: 43

Brands by name

Popular brands

Load more brands