KTI Networks KGS-1064-HP User Manual Download Page 43

Page: 43 / 240

-43-

string length is 8 to 40. The allowed content is the ASCII characters from 33 to 126.

Privacy Protocol

Indicates the privacy protocol that this entry should belong to. Possible privacy

protocols are:

None:

None privacy protocol.

DES

: An optional flag to indicate that this user using DES authentication protocol.

Privacy Password

A string identifying the privacy pass phrase. The allowed string length is 8 to 32, and

the allowed content is the ASCII characters from 33 to 126.

Add New Entry

Click to add a new entry.

Delete

Click to cancel the new entry.

Save

Click to save the changes.

Reset

Click to undo any changes made locally and revert to previously saved values.

Click Add New Entry :

2.5.1.7.4 Groups

Configuration

Description

Delete

Check to delete the entry. It will be deleted during the next save.

Security Model

Indicates the security model that this entry should belong to. Possible security models are:

v1:

Reserved for SNMPv1.

v2c:

Reserved for SNMPv2c.

usm:

User-based Security Model (USM).

Security Name

A string identifying the security name that this entry should belong to. The allowed

Summary of Contents for KGS-1064-HP

















































































































































































































































Search results

Summary of Contents for KGS-1064-HP

Reviews:

Related manuals for KGS-1064-HP

Brands by name

Popular brands

KTI Networks KGS-1064-HP, User Manual

Search results

Summary of Contents for KGS-1064-HP

Reviews:

Related manuals for KGS-1064-HP

Brands by name

Popular brands