manualshive.com logo in svg

KTI Networks KGS-1064-HP, User Manual

Share
Download
KTI Networks KGS-1064-HP User Manual Download Page 18

-18- 

2.1.2 IP 

 

 

   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

   

 

 

 

 

 

 

 

 

Configuration 

Description 

 

   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

   

 

 

 

 

 

 

 

 

DHCP Client 

Enable the 

DHCP 

client by checking this box. 

IP Address 

Provide the 

IP 

address of this switch unit. 

IP Mask 

Provide the IP mask of this switch unit. 

IP Router 

Provide the IP address of the default router for this switch unit. 

VLAN ID 

Provide the managed 

VLAN ID

. The allowed range is 1 through 4095. 

This setting is also called 

MVID (Management VID)

 as abbreviation. 

DNS Server 

Provide the IP address of the DNS Server in dotted decimal notation.   

DNS Proxy 

When DNS proxy is enabled, DUT will relay DNS requests to the current configured 

DNS 

server on DUT, and reply as a DNS resolver to the client device on the network. 

 

   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

   

 

 

 

 

 

 

 

 

  Save   

Click to save the changes. 

  Reset   

Click to undo any changes made locally and revert to previously saved values. 

  Renew   

Click to renew DHCP. This button is only available if DHCP is enabled. 

 

   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

   

 

 

 

 

 

 

 

 

Note:   

1.

 

If DHCP fails and the configured IP address is zero, DHCP will retry. If DHCP fails and the configured IP 

address is non-zero, DHCP will stop and the configured IP settings will be used. The DHCP client will 

announce the configured System Name as hostname to provide DNS lookup. 

2.

 

The IP addresses should be in dotted decimal notation. 

 

Summary of Contents for KGS-1064-HP

















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands