manualshive.com logo in svg

KTI Networks KGS-1064-HP, User Manual

Share
Download
KTI Networks KGS-1064-HP User Manual Download Page 146

-146- 

Disabled:

 Neither frames transmitted nor frames received are mirrored.   

Enabled

: Frames received and frames transmitted are mirrored on the mirror port.   

 

Note: For a given port, a frame is only transmitted once. It is therefore not possible 

to mirror mirror port Tx frames. Because of this, mode for the selected mirror port is 

limited to Disabled or Rx only.   

 

   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

   

 

 

 

 

 

 

 

 

  Save   

Click to save the changes. 

  Reset   

Click to undo any changes made locally and revert to previously saved values. 

 

   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

   

 

 

 

 

 

 

 

 

 

2.19 UPnP 

 

 

   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

   

 

 

 

 

 

 

 

 

Configuration 

Description 

 

   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

   

 

 

 

 

 

 

 

 

Mode   

Indicates the 

UPnP

 operation mode. Possible modes are:   

Enabled:

 Enable UPnP mode operation.   

Disabled:

 Disable UPnP mode operation.   

When the mode is enabled, two 

ACE

s are added automatically to trap UPnP related 

packets to CPU. The ACEs are automatically removed when the mode is disabled.   

TTL   

The TTL value is used by UPnP to send SSDP advertisement messages. Valid values 

are in the range 1 to 255.   

Advertising Duration   

The duration, carried in SSDP packets, is used to inform a control point or control 

points how often it or they should receive a SSDP advertisement message from this 

switch. If a control point does not receive any message within the duration, it will 

think that the switch no longer exists. Due to the unreliable nature of UDP, in the 

standard it is recommended that such refreshing of advertisements to be done at less 

than one-half of the advertising duration. In the implementation, the switch sends 

SSDP messages periodically at the interval one-half of the advertising duration minus 

30 seconds. Valid values are in the range   

 

   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

   

 

 

 

 

 

 

 

 

  Save   

Click to save the changes. 

  Reset   

Click to undo any changes made locally and revert to previously saved values. 

 

   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

   

 

 

 

 

 

 

 

 

 

Summary of Contents for KGS-1064-HP

















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands