manualshive.com logo in svg

KTI Networks KGS-1064-HP, User Manual

Share
Download
KTI Networks KGS-1064-HP User Manual Download Page 174

-174- 

Click to navigate to detailed statistics for this server. 

IP Address 

The IP address and UDP port number (in <IP Address>:<UDP Port> notation) of this 

server. 

Status 

The current status of the server 

This field takes one of the following values: 

Disabled

: The server is disabled. 

Not Ready

: The server is enabled, but IP communication is not yet up and running. 

Ready

: The server is enabled, IP communication is up and running, and the RADIUS 

module is ready to accept accounting attempts. 

Dead (X seconds left)

: Accounting attempts were made to this server, but it did not 

reply within the configured timeout. The server has temporarily been disabled, but 

will get re-enabled when the dead-time expires. The number of seconds left before 

this occurs is displayed in parentheses. This state is only reachable when more than 

one server is enabled.   

 

   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

   

 

 

 

 

 

 

 

 

 

3.4.3.2 RADIUS Details 

 

 

Selects a RADIUS server to display. 

Summary of Contents for KGS-1064-HP

















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands