KTI Networks KGS-1064-HP User Manual Download Page 168

Page: 168 / 240

-168-

3.4.2.2.2 Port

Status

Description

Admin State

The port's current administrative state. Refer to NAS Admin State for a description of

possible values.

Port State

The current state of the port. Refer to NAS Port State for a description of the

individual states.

QoS Class

The QoS class assigned by the RADIUS server. The field is blank if no QoS class is

assigned.

Port VLAN ID

The VLAN ID that NAS has put the port in. The field is blank, if the Port VLAN ID

is not overridden by NAS.

If the VLAN ID is assigned by the RADIUS server, "(RADIUS-assigned)" is

appended to the VLAN ID. Read more about RADIUS-assigned VLANs here.

If the port is moved to the Guest VLAN, "(Guest)" is appended to the VLAN ID.

Summary of Contents for KGS-1064-HP

















































































































































































































































Search results

Summary of Contents for KGS-1064-HP

Reviews:

Related manuals for KGS-1064-HP

Brands by name

Popular brands

KTI Networks KGS-1064-HP, User Manual

Search results

Summary of Contents for KGS-1064-HP

Reviews:

Related manuals for KGS-1064-HP

Brands by name

Popular brands