KTI Networks KGS-1064-HP User Manual Download Page 33

Page: 33 / 240

-33-

MAC based and the MAC Address Limit),

IP: Everything except 'ping'.

Port: Everything except 'VeriPHY'.

Diagnostics: 'ping' and 'VeriPHY'.

Maintenance: CLI- System Reboot, System Restore Default, System Password,

Configuration Save, Configuration Load and Firmware Load. Web- Users, Privilege

Levels and everything in Maintenance.

Debug: Only present in CLI.

Privilege Levels

Every group has an authorization Privilege level for the following sub groups:

configuration read-only, configuration/execute read-write, status/statistics read-only,

status/statistics read-write (e.g. for clearing of statistics). User Privilege should be

same or greater than the authorization Privilege level to have the access to that group.

Save

Click to save the changes.

Reset

Click to undo any changes made locally and revert to previously saved values.

Summary of Contents for KGS-1064-HP

















































































































































































































































Search results

Summary of Contents for KGS-1064-HP

Reviews:

Related manuals for KGS-1064-HP

Brands by name

Popular brands

KTI Networks KGS-1064-HP, User Manual

Search results

Summary of Contents for KGS-1064-HP

Reviews:

Related manuals for KGS-1064-HP

Brands by name

Popular brands