KTI Networks KGS-1064-HP User Manual Download Page 51

Page: 51 / 240

-51-

2.5.1.8.4 Event

Configuration

Description

Delete

Check to delete the entry. It will be deleted during the next save.

Indicates the index of the entry. The range is from 1 to 65535.

Desc

Indicates this event, the string length is from 0 to 127, default is a null string.

Type

Indicates the notification of the event, the possible types are:

none

: The total number of octets received on the interface, including framing

characters.

log

: The number of uni-cast packets delivered to a higher-layer protocol.

snmptrap

: The number of broad-cast and multi-cast packets delivered to a

higher-layer protocol.

logandtrap

: The number of inbound packets that are discarded even the packets are

normal.

Community

Specify the community when trap is sent, the string length is from 0 to 127, the

default is "public".

Event Last Time

Indicates the value of sysUpTime at the time this event entry last generated an event.

Add New Entry

Click to add a new entry.

Delete

Click to cancel the new entry.

Save

Click to save the changes.

Reset

Click to undo any changes made locally and revert to previously saved values.

Click Add New Entry :

Summary of Contents for KGS-1064-HP

















































































































































































































































Search results

Summary of Contents for KGS-1064-HP

Reviews:

Related manuals for KGS-1064-HP

Brands by name

Popular brands

KTI Networks KGS-1064-HP, User Manual

Search results

Summary of Contents for KGS-1064-HP

Reviews:

Related manuals for KGS-1064-HP

Brands by name

Popular brands