manualshive.com logo in svg

KTI Networks KGS-1064-HP, User Manual

The KTI Networks KGS-1064-HP is a high-performance network switch that offers seamless connectivity and efficient data transfer. Unlock the full potential of this powerful device with the comprehensive and user-friendly User Manual available for free download at manualshive.com. Discover all the features and functionalities hassle-free, just a few clicks away.

Share
Download
background image

-62- 

on the port will be classified and switched on the RADIUS-assigned VLAN ID. 

If (re-)authentication fails or the RADIUS Access-Accept packet no longer carries a 

VLAN ID or it's invalid, or the supplicant is otherwise no longer present on the port, 

the port's VLAN ID is immediately reverted to the original VLAN ID (which may be 

changed by the administrator in the meanwhile without affecting the 

RADIUS-assigned). 

This option is only available for single-client modes, i.e. 

• Port-based 802.1X 
• Single 802.1X 

For trouble-shooting VLAN assignments, use the "Monitor→VLANs→VLAN 

Membership and VLAN Port" pages. These pages show that which modules have 

(temporarily) overridden the current Port VLAN configuration. 

RADIUS attributes used in identifying a VLAN ID: 

RFC2868 and RFC3580 form the basis for the attributes used in identifying a VLAN 

ID in an Access-Accept packet. The following criteria are used: 

 • The 

Tunnel-Medium-Type

, 

Tunnel-Type

, and 

Tunnel-Private-Group-ID

 attributes 

must all be present at least once in the Access-Accept packet. 

 • The switch looks for the first set of these attributes that have the same Tag value 

and fulfill the following requirements (if Tag == 0 is used, the 

Tunnel-Private-Group-ID

 does not need to include a Tag): 

    - Value of 

Tunnel-Medium-Type

 must be set to "IEEE-802" (ordinal 6). 

    - Value of 

Tunnel-Type

 must be set to "VLAN" (ordinal 13). 

    - Value of 

Tunnel-Private-Group-ID

 must be a string of ASCII chars in the range 

'0' - '9', which is interpreted as a decimal string representing the VLAN ID. Leading 

'0's are discarded. The final value must be in the range [1; 4095].   

Guest VLAN Enabled    When Guest VLAN is both globally enabled and enabled (checked) for a given port, 

the switch considers moving the port into the Guest VLAN according to the rules 

outlined below. 

This option is only available for EAPOL-based modes, i.e.: 

• Port-based 802.1X 
• Single 802.1X 
• Multi 802.1X 

For trouble-shooting VLAN assignments, use the "Monitor→VLANs→VLAN 

Membership and VLAN Port" pages. These pages show that which modules have 

(temporarily) overridden the current Port VLAN configuration. 

Guest VLAN Operation: 

When a Guest VLAN enabled port's link comes up, the switch starts transmitting 

Summary of Contents for KGS-1064-HP

















































































































































































































































Reviews:

No comments

Related manuals for KGS-1064-HP

AbleNet HouseMate Quick Start Manual preview
HouseMate
Brand: AbleNet Pages: 2
jablotron UC-230 Quick Start Manual preview
UC-230
Brand: jablotron Pages: 2
Kramer VP-727XL User Manual preview
VP-727XL
Brand: Kramer Pages: 61
HPM XL770T Product Information preview
XL770T
Brand: HPM Pages: 4
Eaton SOL30 Series Instruction Leaflet preview
SOL30 Series
Brand: Eaton Pages: 4
Server Technology C-16HF1-C20 Installation And Operation Manual preview
C-16HF1-C20
Brand: Server Technology Pages: 12
Greengate VNLW-P-1001-MV-N-V Installation Instructions preview
VNLW-P-1001-MV-N-V
Brand: Greengate Pages: 2
Key Digital HD Flash 4 KD-SW4x1 Operating Instructions Manual preview
HD Flash 4 KD-SW4x1
Brand: Key Digital Pages: 12
Fairchild FSD210 Operator'S Manual preview
FSD210
Brand: Fairchild Pages: 19
Brocade Communications Systems TurboIron 24X series Hardware Installation Manual preview
TurboIron 24X series
Brand: Brocade Communications Systems Pages: 82
Fairchild FPS FSDH0265RN Manual preview
FPS FSDH0265RN
Brand: Fairchild Pages: 20
Videosec PS04PGE+1PD User Manual preview
PS04PGE+1PD
Brand: Videosec Pages: 5
Bridgetek PANL PH44 Quick Start Manual preview
PANL PH44
Brand: Bridgetek Pages: 2
LevelOne GTL-2690 Installation Manual preview
GTL-2690
Brand: LevelOne Pages: 76
ATEN Master View CS-74A User Manual preview
Master View CS-74A
Brand: ATEN Pages: 16
Conrad RSLT2 Operating Instructions Manual preview
RSLT2
Brand: Conrad Pages: 8
Orbis DICROMAT+ User Instructions preview
DICROMAT+
Brand: Orbis Pages: 2
xpr TBS Manual preview
TBS
Brand: xpr Pages: 12

Brands by name

Popular brands

Load more brands