gemino
51
CONFIGURATION PARAMETERS
DECODER CONTACT-ID
THIRD STEP
Select the event code
In this table is allowed to set event code to be sent to the selected numbers.
A new event can be added by pressing the button “New Event”. Selecting an
event from the table, it can be modified by pressing the button “Modify” or it can
be deleted with the button “Delete Event”. The use of default code is allowed by
pressing the button “Default Contact-ID” and selecting the desired events from
the list. Up to 100 events can be setted.
Event Code:
It is the event code associated with the Contact-ID packet (qualifier
included).
Description:
It is the SMS message or email associated with the Contact ID packet
Voice Message:
It is the voice message associated with the Contact ID packet.
It is possible to create a voice message same as the description one with the TTS
function (text-to-speech).
Is now allowed to proceed with the insertion of the optional features pressig the
button “Forward” or even close the programmation pressing the button “Output”
(
PART B
).
FOURTH STEP
Partition code selection
In this table is allowed to set zone code associated with the event previously
programmed. It’s possible to add a new code by pressing the button “New
Group”. Selecting a code from the table, it can be modified by pressing the
button “Modify Group” or it can be deleted with the button “Delete Group”. The
use of default code is allowed by pressing the button “Default Contact-ID” and
selecting the desired events from the list. Up to 100 partition can be added.
Description:
This is the SMS message or e-mail associated with the Contact-ID
pack.
Group code:
It is the number of the partition associated with the event.
Voice Message:
This is the voice message associated with the Contact-ID pack.
Is now allowed to proceed with the insertion of the optional features pressig
the button “Forward” or even close the programmation pressing the button
“Output”. (
PART C
).