gemino
47
CONFIGURATION PARAMETERS
SIM OPTIONS
SIM Number:
telephonic number of SIM card. It is highly recommended to
program this parameter,
gemino
uses it to perform any test about correct working
and for maintain date and hour synchronized.
Credit Check
Check Interval:
Is the maximum time, in days, between two credit checks. The
device however, checks, the credit after every phone call and every 10 SMS sent.
Check threshold:
Is the threshold (expressed in Euro or in local currency) below
which
gemino
generates the warning of credit deficiency and performs the
switching of SIM (if there are two SIM).
GSM Service Provider:
Select an operator from among those proposed to enable
the credit check.
Expiration Check
SIM expiry date:
Insert the SIM expiry date.
Period:
Is the time, in days,in which the deadline is stretched at each SIM
recharge. If set to zero, the SIM expiry check is not performed.
Destination List:
Select Phonebook numbers that will receive reports of residual
credit and SIM expiry. To add an entry, press the ‘Add’ button. Up to two
recipients can be added
DATE AND TIME
Enable NTP client:
By selecting this option it is possible to enable the synchronization
of date and hour by predisposed servers
NTP server:
Select a server among the proposed ones.
Delay on startup:
delay time for the synchronization with server at the device
start-up.
Time zone offset:
Value (in hours) of time zone set.
Daylight saving time:
This button will enable the automatic switching of summer
winter time. checking this option will show a Panel in which date/time changing
can be programmed.