gemino
43
CONFIGURATION PARAMETERS
PHONEBOOK
Send Contact-ID events:
Contatti ai quali è possibile inviare eventi Contact-ID
Customer Code:
Code assigned by the Central Monitoring Station
GPRS
NOTE
The following parameters are only required if the device is configured to
send emails or signalisations through SIA DC-09. Before proceeding with the
configuration, check with the service provider that the SIM is enabled for email
transmission and, if necessary, which SMTP servers may be used. GSM/GPRS
operators usually require the registration of the SIM and the use of specific
domains for sending emails
APN:
this is the point of access to the GPRS network
(this parameter is supplied by the GSM/GPRS operator).
Username:
User name for the access point of GPRS network
Password:
Password for the access point of GPRS network
Server SMTP:
Name of the SMTP server
(this parameter is supplied by the GSM/GPRS operator).
Username:
Username required to log on to the SMTP server.
Password:
Password for access to the SMTP server.
E-mail from:
Email address of the sender associated with the username.
Subject:
String typed in the subject-line area in emails sent by
gemino
.
IP EVENTS
On this page you can configure the programming data to receive signalisations
through SIA DC-09 Protocol.
Enable events over IP:
By selecting this option enables to send signalisations to
receivers
Enable channel supervision:
Select this option if you want the device to send
periodic signalisations to the main receiver.
Supervision interval:
Time (in seconds) programmable to configure the interval
between two supervision packets
Max supervision fail:
attemps done to the supervision receiver
Server/Client GPRS Port:
port on which receive/send packets on GPRS channel
Supervised Receiver:
Receiver on which the supervision of device is performed