gemino
38
REMOTE CONTROL OF THE DEVICE BY SMS
gemino
and
gemino4
provide two new functions for the remote control via SMS,
which allow to re-configurate the phonebook or checking the remaining credit
on your sim card.
RE-CONFIGURE THE PHONEBOOK
To re-configure a number on your phonebook you have to send
gemino
a SMS
formed according to the following pattern:
<user code> #r <phonebook position> # <phone number> #
for example, if we want to change the second number of the phonebook we will
have to send the following SMS:
147258#r2#3701234567#
CHECK THE DEVICE STATUS
To check the status of the device you have to send
gemino
an SMS formed
according to the following pattern:
<user code>#c
For example:
147258#c
The device will question the network and send to the scheduled numbers on
“GSM options” page (credit check and SIM expiry) an SMS like:
SIM 1: 33, 12/03/2013 SIM 2: 15, 17/04/2013 IN: 0 0 0 0 OUT: 0 0
on which residual credit and expiry for each SIM, inputs status (0 at rest, 1 in alarm)
and the outputs status (0 at rest, 1 active) are reported
ACTIVATE OUTPUTS
In order to activate and manage outputs it is possible to send different SMS
composed as follow:
<user code> #O <output number> = <ACTION>
on which:
<user code> is the user PIN programmed on “options” page
<output number> is 1 (terminal O1) or 2 (terminal O2)
<ACTION> is ON if you want to activate the output, OFF if you want to deactivate
it.
For example, if you want to activate the aoutput O1 you will have to send the
following SMS:
147258#O1=ON