gemino
50
CONFIGURATION PARAMETERS
DECODER CONTACT-ID
gemino
is capable of recognizing up to 8 numbers called by the switchboard
connected to it and of decoding the Contact ID protocol, which will be sent via
voice messages / SMS / email / SIA DC-09.
With
gemino4
and
gemino exp.
versions it is also possible to to send signalisations
(imput status, missing net etc..) through Contact-ID protocol over the GSM
network, for example to a Central Monitoring Station. Whenever
gemino
recognises one of these numbers, it will not send the call on the voice channel. If
no number is entered, this function is not active.
To programm this function, drag from the Palette a decoding instruction, that
activate a help guide organised in 5 steps.
The voice message, SMS or e-mail sent will consist of various parts
A+B+C+D
. If
gemino
won’t recognize any of the program codes, it will send only a portion of
these messages. This can be useful to identify mistakes, but also to send alarm
messages via e-mail to receiver software. Visit our website for more information
about Contact ID Protocol and event codes used by Panels.
FIRST STEP
On this step is possible to choose to create /modify / delete a decoding
instruction. Let’s consider now the creation of a new decoding instruction:
SECOND STEP
Instruction setting
Number to be decoded:
This is the number selected by the Panel and used for
communication with the Contact ID protocol (at least 4 numbers)
Customer code:
This is the client code entered on the Panel and associated with
the Contact ID message.
Processing mode:
It allows to sent the signalisation via voice message, SMS /
e-mail / SIA DC-09, depending of settings
Header:
This is the heading of the SMS message or email associated with the
Contact-ID pack.
Voice message:
Is the message to be played when a caller is recognized
(
PART A
)
Destination numbers:
Select the numbers from the phonebook to which
information messages from the panel are sent via vocal message, SMS or email
with the Contact-ID protocol.