12.2.7
Sensors
Table 132: Accessories – Pressure measurement
Description
Design
Mat. No.
[kg]
The PumpMeter device is an intelligent
pressure transmitter for pumps, with on-
site display of measured values and
operating data.
PumpMeter is parameterised at the
factory in line with pump-specific
requirements. Configuration selections
are made in KSB EasySelect.
Refer to the last section of this type series
booklet for more information.
Pump-specific
-
0,1
Differential pressure transducer
With two copper-spiralled pipe sections
measuring 75 cm in length for connection
to the discharge or suction nozzles,
complete with retaining plate, spiralled
pipe section and adapter, output 4 to
20 mA, 3-wire output, supply voltage
18 to 30 V DC, 2.5 m connection cable
Ambient temperature -10 to +50 °C
Temperature of measured medium -10 to
+80 °C
0 - 1 bar, RC3/8
01111180
0.3
0 - 2 bar, RC3/8
01109558
0.3
0 - 4 bar, RC3/8
01109560
0.3
0 - 6 bar, RC3/8
01109562
0.3
0 - 10 bar, RC3/8
01109585
0.3
0 - 1 bar, RC1/2
01111303
0.3
0 - 2 bar, RC1/2
01111305
0.3
0 - 4 bar, RC1/2
01111306
0.3
0 - 6 bar, RC1/2
01111307
0.3
0 - 10 bar, RC1/2
01111308
0.3
A-10 pressure transducer
For general applications, for liquid and
gaseous fluids 0 to + 80 °C, measuring
accuracy smaller than or equal to 1 %, 2.5
% max. (at 80 °C), G1/4B process
connection with Cu joint ring, IP 67, 2-
wire output 4 to 20 mA
0 - 2 bar
01152023
0.07
0 - 5 bar
01152024
0.07
0 - 10 bar
01210880
0.4
0 - 16 bar
01073808
0.128
0 - 20 bar
01152025
0.07
0 - 50 bar
01152026
0.07
S-20 pressure transducer
For general applications in industry,
mechanical engineering and hydraulics,
Pneumatics for liquid and gaseous fluids
-30 to +100 °C, Parts in contact with the
measured medium made of CrNi steel (no
gaskets), Mechanical shock load capacity
up to 100 g (IEC 60068-2-27), Vibration
load capacity at resonance up to 20 g (IEC
60068-2-6), Measuring accuracy < 0.5 % of
measuring range, G1/2B EN837
connection, IP65 enclosure, 2-wire output
4 - 20 mA, 3-wire output 0 - 10 V DC,
Maximum line cross-section of 1.5 mm
²
,
Outer line diameter of 6 to 8 mm, ,
Electrical connection via angular
connector to DIN 175301-803 A
0 - 1.0 bar
01147224
0.12
0 - 1.6 bar
01147225
0.12
0 - 2.5 bar
01147226
0.12
0 - 4.0 bar
01147267
0.12
0 - 6.0 bar
01147268
0.12
0 - 10.0 bar
01147269
0.12
0 - 16.0 bar
01084305
0.159
0 - 25.0 bar
01084306
0.2
0 - 40.0 bar
01087244
0.2
-1 - 1.5 bar
01150958
0.6
-1 - 5.0 bar
01087507
0.2
-1 - 15,0 bar
01084308
0.2
-1 - 24,0 bar
01084309
0.2
12 Purchase Order Specifications
152 of 162
PumpDrive
