Kronoterm HM-130 S1, Instructions For Installation, Use And Maintenance Manual

Page: 8 / 60

8
Store this manual in an appropriate dry place close to the device.
1.6 Obligations of the installer
The installer is responsible for installing the device in accordance with the following
requirements:
To thoroughly study the instructions for use and installation accompanying the
device before installation.
To install the device in accordance with the instructions and national legislation,
policies and standards in force.
1.7 Obligations of the authorised contractor for
commissions
CAUTION
The first commission can only be performed by the contractor of commissions
appointed by the manufacturer in accordance with the instructions for commission.
The contractor for commissions is responsible for commissioning the device in accordance
with the following requirements:
The contractor performs the first commission and eliminates all eventual
irregularities found during commission.
Trains the user for operating the device and settings.
Alerts the user to regularly maintain the device for keeping the device functioning
properly throughout its entire lifespan.
To give the user all the documentation accompanying the device.
1.8 Package and worn-out device management
Sort the package according to cardboard, wood and foil and dispose of it in
appropriate containers.
After the lifespan of the device ends it has to be disposed of in accordance with the
legislation in force on waste electrical and electronic devices and devices with F-
gasses.
Refrigerant
The device has to be connected to the outdoor unit which holds the HFC coolant which is a
fluorinated greenhouse gas covered in the Paris protocol. You have to prevent leakage of
the gas into the atmosphere. During a maintenance procedure or removal of the device it
has to be made sure that the gas is removed in accordance with the current regulations on
the use of fluorinated greenhouse gasses.