Kronoterm HM-130 S1, Instructions For Installation, Use And Maintenance Manual

Page: 21 / 60

21
2
Copper pipe held downwards
8. Attach the bolt you have previously removed from the device onto the pipe as seen
below.
1
Copper pipe
2
Screw nut
9. Edge the end of the pipe with the edging tool.
1 Holder 4 Cone
2 Copper pipe 5 Bracket
3 Fitting 6 Handle
7 Holder
Mount the copper pipe firmly into the tool for edging. Consider the dimensions listed
in the table below.
External diameter
‘
'A''
[mm] [inch] [mm]
9.52 3/8 1.5 ~ 1.7
15.88 5/8 1.6 ~ 1.8
10. Check the end of the pipe:
Compare the edging of the pipe with the picture below.
In the case of damaged edging cut the part off and repeat the edging procedure.