Kronoterm HM-130 S1, Instructions For Installation, Use And Maintenance Manual

Page: 15 / 60

15
3.1 Transport and storage
WARNING
Valves, safety elements and pipes must be checked, calculated and
determined by the system or hardware installations contractor.
WARNING
Before connecting the device, it is necessary to rinse the pipe system
thoroughly and remove impurities (solid particles, oils, greases ...).
Use suitable detergents if necessary.
NOTE
The device must be connected via closing valves.
CAUTION
The device must be transported with transport devices.
Secure the device during transport to prevent damage.
The device must not be stacked and other objects must not be placed on it.
CAUTION
Appropriate transport equipment must be used for installing the device. Safety
regulations and good practise have to be used.
CAUTION
The device has to be stored in a dry and clean place. The allowed storing
temperature is between 10 °C and 45 °C, for a short period (up to 24h) also up to
50 °C.
3.2 Installation space
The device must be installed in a space which meets the following requirements:
NOTE
The installation space must be accessible by manual transport devices for the
purposes of installation, maintenance and servicing.
Costs connected with hiring special equipment for installing the device,
servicing and maintenance are charged to the operator separately and are
not subject of the warranty.
NOTE
The location of the internal unit must be dry and in the temperature range between
+10
°C and 40 °C.
WARNING
The space has to be fitted with a drain.
CAUTION
It is forbidden to install the device under water pipes; in case of leakage water
could enter the device and cause a malfunction.
NOTE
It is obligatory to consider the minimal clearance from obstacles for ensuring
unobstructed access for maintenance and service of the device.