EN
page 34
2.3
Detergent use
The machine has a standard detergent dispenser. The machine automatically sucks the
product.
The detergent shall be the NO FOAM type, suitable for industrial dishwashers.
The use of good quality liquid detergents is recommended.
Follow the manufacturer’s recommendations for chemical dosage, related to the local water
hardness. 1cm. of the product drawn into the tube is equal to about 0.15 g. A correct amount
of detergent is very important for a successful wash.
Should the detergent lack, the display will show
"DETERGENT LEVEL"
(only with optional
"Sensor for Chemicals Low Level").
2.4
Rinse aid use
The machine has a standard rinse aid dispenser. The machine automatically sucks the
product.
The recommended amount is 2-5 cm of product measured on the suction hose.
1 cm of the product drawn into the hose is equal to about 0.13g. A correct amount of rinse
aid is very important for a quick and proper drying.
NB:
Excessive amount of chemicals or foam will reduce wash pump effi ciency.
Should the detergent lack, the display will show
"RINSE-AID LEVEL"
(only with optional
"Sensor for Chemicals Low Level").
2.5
Drain pump system
Press the key
"E"
till the display will show
"TANK DRAINING"
.
The discharge pump will automatically drain the wash-tank.
During the drain process, the button
"A"
will light in blue and will be fl ashing.
After the draining is complete, the machine will turn automatically in
"STAND-BY"
mode.
If you want to refi ll the machine for a new cycle, see chap. 2.2.
2.6
Regeneration device (optional)
Should the machine be equipped with a water-softener circuit, this will be fully automatic.
When needed, a 120” regeneration cycle will automatically activate. During this phase, the
display will show the letter
"R"
.
RINSE
AID
rinse-aid level
tank draining
STAND-BY
detergent level
DETERGENT
