EN
page 32
The button
“A”
will light in white for a few seconds, while loading the software. After
loading is complete, the button will light in red. This happens only at the first start of the
day of the machine.
The water filling of the wash-tank is done by pre-heating via the boiler.
On the
"B"
display, the messages
"FILLING WATER"
and
"HEATING"
will alternate.
The display will read
"HEATING"
, till wash-tank and boiler will reach the set temperatures.
During this process, the machine will not allow any cycle selection or start.
If the machine is in standard configuration, with hot water in-feed (50°C), with no extra
power, the
“A”
button will light in green after some 20 min.
2.2.2 Operation
• Insert the rack filled with dishes to wash.
The plates must be correctly placed in the rack (see pict. 4).
• Select the wanted washing cycle by pushing the green START button
"A"
.
filling water
heating
The display will show in sequence all these available programs.
Once the wanted program is displayed, do release the button.
Available programs for machine with a 40 mm rack:
Available programs for machine with a 50 mm rack:
Pict. 4
standard cycle
short cycle
standard 70°c
long cycle
clean long
clean long
long cycle
medium cycle
long 70°C
glasses 70°C
clean standard
clean standard
