EN
page 33
• All wash-time long the display will read the wash-tank temperature and the boiler
temperature.
Below the temperatures indications line-bar is displayed to show the progression of the
wash-cycle.
wash
At the end of the washing cycle, a hot rinse cycle will take place
A blue/green flashing on the button
"A"
will indicate the
"CYCLE ENDED".
cycle ended
NB:
At cycle-end, keeping the door closed, dishes will not dry. Take out the rack or keep
the door open to allow evaporation, helping the drying of the dishes.
When opening the door, the button
"A"
will turn green, indicating that the machine is
ready for a new wash-cycle.
NB:
The last cycle used remain in the memory of the electronic board, ready for the next
use.
If you run the machine in "partial drain" mode (not in total Clean water mode), the
machine will automatically perform a full drain of the washing tank, in order to
keep performances at beat, every 30 cycles (see chap. 2.5 Drain Pump System).
2.2.3 Switching OFF
• Turn the button
"C"
. The display will show
"STAND-BY"
.
• At the end of the day, clean the machine (see chap. 5 "Maintenance").
• Shut the water valve.
• Switch the main power switch OFF.
STAND-BY
%%%%%
