EN
page 31
2. OPERATION
2.1 Control panel and relative symbols
A)
START push-button to start up cycle / select cycle
B)
Display
C)
Switching – On / STAND BY button
D)
Regeneration push-button (optional)
E)
Drain Push-button
2.2 Machine start-up
2.2.1 Start-up
• Check if the pump suction filter is properly inserted in its seat in the wash-tank bottom
(see picts. 2 and 3).
This filter must be cleaned every 20 wash-cycles or whenever necessary.
DO NOT use the appliance without the filters.
• Put the surface filters in place (see picts. 2 and 3).
• Shut the dishwasher door.
• Turn the water valve “open”.
• Turn the main power switch ON.
• The machine is on
"STAND-BY"
.
In the
"B"
display, the message
"STAND-BY"
will appear.
STAND-BY
• Turn the button
"C"
.
The machine start will be active when the
"A"
button will light.
On the
"B"
display the
"STAND-BY"
message will be off.
Pict. 1
Pict. 2
(for machine with a 40mm rack)
Pict. 3
(for machine with a 50mm rack)
