KROHNE OPTISYS SLM 2100, Handbook, Page: 27 / 88

ELECTRICAL CONNECTIONS
4
27
OPTISYS SLM 2100
www.krohne.com 01/2017 - 4002737304 - MA OPTISYS SLM 2100 R04 en
4.1 Safety instructions
4.2 Used abbreviations
DANGER!
All work on the electrical connections may only be carried out with the power disconnected. Take
note of the voltage data on the nameplate!
DANGER!
Observe the national regulations for electrical installations!
WARNING!
Observe without fail the local occupational health and safety regulations. Any work done on the
electrical components of the measuring device may only be carried out by properly trained
specialists.
WARNING!
Before performing any work on the device switch off the power and make sure that it cannot be
switched on accidently.
INFORMATION!
Look at the device nameplate to ensure that the device is delivered according to your order.
Check for the correct supply voltage printed on the nameplate.
Abbreviation Description
CI
a
Control input active
I
a
Current output active
I
max
Maximum current
I
nom
Nominal current
R
L
Load resistance
P Power
U
int, nom
Nominal internal voltage
U
ext
External voltage
U
o
Terminal voltage
VAC Alternating current (AC) voltage
CI Control input
PCS Process control system
NO Switch (normally open)
NC Switch (normally closed)
LED Light-emitting diode
K Relay