kozy heat Dassel DSL-36-RF, Installation And Operation Manual

Page: 63 / 69

RF REMOTE TROUBLESHOOTING (DSL-36-RF only)
AUTO PATH
If the manual switch is set to
REMOTE, press the Mode
button to display AUTO on
the transmitter, Does the
transmitter display the room
and temperature setting?
If the setting is above room
temperature on the transmit-
ter, does the main valve and
fan turn on?
If the setting is below room
temperature on the transmit-
ter, does the main valve and
fan turn off?
Release pilotstat
knob
Did the LED stop
blinking?
Turn pilotstat knob
from PILOT to ON
Light pilot burner
Set manual switch to
LOCAL or REMOTE
Turn pilotstat knob to OFF to
turn valve completely off
Does the transmitter control
fan
If the manual switch is set to
REMOTE, set the Mode
button to display “ON”. Does
the transmitter control the
main burner and fan ?
Does transmitter change
levels of flame height, fan
speed and set temperature?
Set levels of flame height and
fan to “0” to shut off main
burner and fan
If the manual switch is set to
LOCAL, did the main burner
light?
Turn pilotstat knob to OFF to
turn valve completely off
Move switch from
MANUAL to RE-
MOTE. Press any key
on transmitter.
No
Move switch from LOCAL to
REMOTE. Press any key
within 30 seconds.
Review LED failure
analysis
Choose LOCAL or REMOTE
path. Set switch to MANUAL
or REMOTE
Cycle switch once and leave
in remote. Press any key on
transmitter for recognition
operation
Five minute wait
period
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
LOCAL PATH
REMOTE PATH
No
Yes
Yes
Turn pilotstat knob to PILOT
to turn off main burner
Turn pilotstat knob to OFF to
turn valve completely off
Move switch from
LOCAL to REMOTE.
Press any key on trans-
mitter. Move switch
back to LOCAL.
No
Yes
Yes
PAGE 62