LOG SET INSTALLATION
ATTENTION: If converting to LP (propane) gas or installing the optional firebrick refractory, do so now
before installing log set. Follow instructions included with conversion kit and / or refractory kit.
STEP 1: #D1 Log Placement
NOTE: Logs are installed in numerical order. Log numbers are located on the bottom of each log. Refer
to following instructions and illustrations for proper placement.
CAUTION: Do not place logs directly over burner port holes. Improper log placement may affect flame
appearance and cause excessive soot to build up on logs and glass.
#D1
PAGE 37
PLACE THE BACK LOG ON THE TWO
PLATFORMS LOCATED AT THE BACK OF
BURNER. ALIGN THE PINS ON PLATFORMS
WITH THE HOLES IN THE BOTTOM OF LOG.
Summary of Contents for Dassel DSL-36-RF
Page 68: ...PAGE 67...
Page 69: ...PAGE 68...
