Using the OASYS PCI
Using Programs & Patches
OASYS PCI
21
Creating splits and layers of Patches within a Program
The two Patches in a Program can be layered together, or split by key and/or
velocity ranges. Note that Programs can also be split and layered within a Multi,
which interacts with the Patch key and velocity ranges as shown below.
Cumulative Program and Patch high/low key windows
Layers
To layer Patches in a Program:
1.
In the Program Edit window, set the High/Low Key and Velocity parameters
so that each Patch is active over the entire keyboard and velocity range.
That’s it!
Keyboard splits
To create a keyboard split between two Patches:
1.
In the Program Edit window, set the Low Velocity for each Patch to the
minimum (1), and the High Velocity to the maximum (127).
This will make sure that the Patches both respond to the full velocity range.
2.
Set the High/Low Key parameters for each Patch so that each is active for
only a speci
fi
c keyboard range.
For instance, setting the Low Key to C4 and the High Key to C8 will make the Patch
play only in the upper part of the keyboard.
When the High/Low Key and Velocity parameters are selected, you can press and
hold the Shift key to edit the values by playing notes on your MIDI controller.
Velocity splits
To create a velocity split between two Patches:
Program key window:
Patch key window:
Resulting key window: C4 to A6
Patch
Program
Result
C-1 to A6
C4 to G9
Summary of Contents for Soundlink DRS OASYS PCI
Page 4: ...iv OASYS PCI English ...
Page 5: ...Introduction OASYS PCI 1 Introduction ...
Page 9: ...Using the OASYS PCI OASYS PCI 5 Using the OASYS PCI ...
Page 63: ...Using the OASYS PCI Working With Files OASYS PCI 59 File and folder organization ...
