Korg Soundlink DRS OASYS PCI User Manual Download Page 88 | Manualshive

Page: 88 / 148

background image

Channel Parameters

Reference

84

OASYS PCI

English

Off means that the channel is unused, allowing the OASYS PCI Engine to optimize
the Mixer (for more information, see “Managing Resources” on page 60).
Note that all of the parameters on this page, except for the Program/Audio Input
select, apply only to Programs.

Program/Audio Input

Program: Any Program File.
Audio Input: Analog L, R (mono) and L-R; ADAT 1-8 (mono) and 1-2, 3-4, 5-6, 7-
8 (stereo); S/PDIF L, R (mono) and L-R (stereo).
Stream: 1-8 (mono) and 1-2, 3-4, 5-6, 7-8 (stereo).

This is the same as the input select for the Mixer Channel.
The input may be either a Program, an Audio Input, or a Stream (from a digital
audio program), as selected by the Input Type parameter.
To select an Audio Input or Stream:

1.

Set the Input Type parameter as desired (Audio Input or Stream).

2.

Select the desired Audio Input or Stream from the menu.

Clicking on the menu shows a list of either Audio Inputs or Streams, depending on
the selected Input Type. Audio Inputs and Streams are shown as both mono and
paired stereo.
To select a Program:

1.

Drag a Program from the Catalog onto the Input Select parameter.

or

Select the Input slot and then double-click the name of the Program in the
Catalog.

For more information on selecting Programs, please see “Editing a Patch” on
page 20.
Double-clicking on the Program name brings up the Program Edit page, as
described on page 86.
You can copy Programs from one channel to another using drag-and-drop, or by
using the Edit menu cut, copy, and paste commands.
You can delete a Program from a channel by using the Edit menu cut command, or
by pressing the Delete key.

Coarse Tune

-48 to +48.

This is the coarse tuning, in semitones, for the Program.

Fine Tune

-100 to +100.

This is the

fi

ne tuning, in cents (1/100 of a semitone), for the

Program.

«
...
86
87
88
89
90
...
»

Summary of Contents for Soundlink DRS OASYS PCI





















































































































































Reviews:

No comments

Related manuals for Soundlink DRS OASYS PCI

Brand: TerraTec Pages: 8

Brand: StarTech.com Pages: 10

GV-N84S-512I Rev3.0

Brand: Gigabyte Pages: 34

Brand: Promag Pages: 7

PCI-1002 Series

Brand: ICP DAS USA Pages: 53

Brand: ICP DAS USA Pages: 138

OBID i-scan ID ISC.MR200-EP

Brand: Feig Electronic Pages: 53

Brand: Riverbed Pages: 154

Brand: ADLINK Technology Pages: 60

Brand: GE Interlogix Pages: 34

Brand: GE Interlogix Pages: 36

Brand: EMS Imaging Pages: 8

Brand: Nordic ID Pages: 19

Thunderbolt Pro P2

Brand: Sonnet Pages: 2

Brand: Rosslare Pages: 2

Brand: ZALMAN Pages: 24

Brand: Digitus Pages: 6

Brand: Digitus Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands