manualshive.com logo in svg

Korg Soundlink DRS OASYS PCI, User Manual

Share
Download
Korg Soundlink DRS OASYS PCI User Manual Download Page 37

Using the OASYS PCI

Using Modulation

OASYS PCI

33

The Control Panel changes will be recorded as SysEx messages in the record-
enabled track.

7.

When you are 

fi

nished, switch back to the sequencer and stop recording.

8.

Play back the sequence to hear the recorded automation.

If you have enabled “Update Control Panel from MIDI,” as described above, then 
you will see the Control Panel change as the automation plays.

SysEx Messages are tied to Channel and slot

The System Exclusive messages are tied to the particular Mixer Channel/Send 
Bus/Output Bus and Slot, so that messages from Effect 2 on Channel 3 are separate 
from those of Effect 4 on Channel 7. If you move a Program, Patch, or Effect to a 
new slot or Channel, Send Bus, or Output Bus, previously recorded System 
Exclusive messages will no longer work properly.
Changing the MIDI Channel used by the Mixer Channel, Send Bus, or Output Bus 
will not affect the System Exclusive messages; they will continue to work as they 
did before.

SysEx format

For low-level details on the OASYS PCI System Exclusive format, please see “MIDI 
System Exclusive Format” on page 139.

Mixer parameters have preset modulation routings

All parameters in the Mixer, Send Bus, and Output Busses windows have built-in 
MIDI modulation routings, as shown in the chart below.

Mixer parameter

MIDI Controller #

Notes

Volume

7

Sets the maximum volume 

of the channel. This is 

modified by Expression, as 

described below.

Width

8

Pan

10

64 is absolute center; 

0 is hard left;

127 is hard right

Summary of Contents for Soundlink DRS OASYS PCI





















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands