Using Programs & Patches
Using the OASYS PCI
22
OASYS PCI
English
1.
In the Program Edit window, set the Low Key for each Patch to the
minimum (0, or C-1), and the High Key to the maximum (127, or G9).
This will make sure that the Patches both respond to the full keyboard range.
2.
In the Program Edit window, set the High/Low Velocity parameters for
each Patch so that each is active for only a speci
fi
c velocity range.
For instance, setting the Low Velocity to 100 and the High Velocity to 128 will
make the Patch play only when the velocity is fairly high.
When the High/Low Key and Velocity parameters are selected, you can press and
hold the Shift key to edit the values by playing notes on your MIDI controller.
Saving Programs
If you have created a Program that you’d like to use in other Multis, you can save
the Program as a separate
fi
le on disk. Program
fi
les store all of the information in
the Program Edit window, along with any Insert Effects used in the Program’s
Mixer Channel, and all Control Panel settings for the Program’s Patches and
Effects.
To save a Program and its Insert Effects:
1.
Make sure that the Program Edit window is in the foreground.
2.
Select the “Save Program and Insert Effects As…” command from the File
menu.
3.
Name the Program.
4.
Select a location to save the Program.
The OASYS PCI installer creates a folder named “User Files,” with sub-directories
for Programs and Multis. You can save your own Programs into the Programs
folder inside this directory (User Files:Programs). You can also create other main
folders inside the OASYS PCI folder, at the same level as “User Files.”
It’s important to store Programs inside a sub-directory named “Programs.” If a
Program is not stored in a Program folder inside the OASYS PCI folder, it will not
appear in the Program Catalog.
For more information on saving
fi
les, see“Working With Files” on page 55.
Don’t save into the Korg and Korg FX Programs folders
The Korg and Korg FX Programs folders are reserved for Korg’s own use, so don’t
save your own sounds in these folders. If you do, the sounds may be deleted when
you update or re-install the OASYS PCI software.
Summary of Contents for Soundlink DRS OASYS PCI
Page 4: ...iv OASYS PCI English ...
Page 5: ...Introduction OASYS PCI 1 Introduction ...
Page 9: ...Using the OASYS PCI OASYS PCI 5 Using the OASYS PCI ...
Page 63: ...Using the OASYS PCI Working With Files OASYS PCI 59 File and folder organization ...
