Korg Soundlink DRS OASYS PCI, User Manual

Page: 79 / 148

Reference Send Busses
OASYS PCI 75
Input Trim
0-127. The Input Trim allows you to adjust the gain into the Send Bus without
altering each channel send individually. For instance, let’s say that the Send Bus has
a reverb which is overloading on input, and 5 channels are routed to the Send Bus.
You could scale back each of the 5 channels individually, one by one–or, instead,
just reduce the overall send amount.
For those interested in the technical side of things, this parameter works by scaling
the send levels on each channel, and does not add another gain stage.
Input Trim responds to MIDI controller #12 on the selected MIDI channel.
Note : this parameter only controls the send levels on the OASYS PCI mixer. It has
no effect on Streams directly summed into the Send Bus.
Effects 1-4
Each Send Bus can have up to four effects. The effects are in series from top to
bottom; effect 1 is
fi rst, and effect 4 is last.
Send Effects Routing
To select an Effect:
1. Drag an Effect from the Catalog onto the desired insert slot.
or
Select an Effect slot and then double-click the name of the Effect in the
Catalog.
For more information on using the Catalog, please see the section titled “Catalog”
on page 108.
If no Effect is selected for a slot, the signal will pass through unaltered, and the slot
will simply show “(none).”
You can copy Effects from one slot to another by using drag-and-drop, or by using
the Edit menu’s cut, copy, and paste commands.
To delete an Effect, use the Edit menu’s cut command, or press the Delete key.
Editing Effects
To edit the Effect’s parameters, double-click on the Effect name. This will bring up
the Effect’s Control Panel, as described on page 92.
Insert 1 Insert 2 Insert 3 Insert 4
Volume
FX Send
Master Vol