manualshive.com logo in svg

Korg Soundlink DRS OASYS PCI, User Manual

Share
Download
Korg Soundlink DRS OASYS PCI User Manual Download Page 128

ASIO Control Panel/ Audio Settings

Reference

124

OASYS PCI

English

Windows 95/98/ME control panel

General

ASIO

ASIO stands for “Audio Stream Input/Output,” and is a method for 
communicating audio between software and I/O hardware. The OASYS PCI 
offers multichannel audio support for all ASIO-compatible digital audio software, 
including Cakewalk Metro, Cool Edit Pro, Cubase VST, Digital Performer, Logic 
Audio, Vision DSP and Studio Vision Pro, and more. 
Before using the OASYS PCI with ASIO software, the OASYS PCI ASIO driver 
must be installed, and the OASYS PCI must be selected as the software’s ASIO 
device. For more information, please see the “Con

fi

guring ASIO Software” section 

in the Installation Guide, and the manual for your digital audio software.

Windows audio programs

Before using the OASYS PCI with Windows audio programs, various settings 
should be made in Windows. For more information, please see the “Con

fi

guring 

MME (Windows)” section in the Installation Guide, and the manual for your 
digital audio software.

Zero-Latency Monitor Mixer

The OASYS PCI includes a built-in, zero-latency monitor mixer, so that you can 
listen to inputs during recording without any audio delay. You can adjust the 
volume level for each input, and route each input to any output.

NOTE: To view the window at full resolution, zoom in to 200%.

Summary of Contents for Soundlink DRS OASYS PCI





















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands