manualshive.com logo in svg

Korg Soundlink DRS OASYS PCI, User Manual

Share
Download
Korg Soundlink DRS OASYS PCI User Manual Download Page 133

Reference

Wave Device Settings (Windows)

OASYS PCI

129

Wave Device Settings 
(Windows)

General

Through the OASYS PCI’s standard wave device driver, the card can be used by 
any standard Windows digital audio program. The OASYS PCI appears as six full-
duplex stereo cards, one for each input/output pair, as well as four stereo output-
only devices for the eight Streams. 
Programs which support multichannel I/O have simultaneous access to all 12 
inputs and 20 outputs, up to the limits of the program itself. 
The OASYS PCI Wave Device Settings program controls the card’s sample rate, 
word clock source, and play/record synchronization. Optionally, it also lets you set 
volume and balance for each output device. From this program, you can also call 
up the Audio Settings, Hardware Meters, and Diagnostics windows.

NOTE:

 This window only affects audio I/O with standard Windows audio drivers. 

It does not affect use with ASIO programs. Additionally, the volume and balance 
controls apply only to audio program outputs; they do not control the output levels 
of OASYS PCI synths and effects.

NOTE: To view the window at full resolution, zoom in to 200%.

Summary of Contents for Soundlink DRS OASYS PCI





















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands