Konica Minolta Magicolor 5440 dl, User Manual

Page: 147 / 164

Dual In-Line Memory Module (DIMM)
137
Dual In-Line Memory Module (DIMM)
!"
You may need additional memory (DIMM) for complex graphics, and
for duplex printing.
Dual in-line memory module (or DIMM) is compact circuit board with sur-
face-mount memory chips.
Your printer comes with 64 MB SDRAM printer memory on board. However,
you can upgrade to a maximum of 576 MB of RAM through the installation
of an additional 512 MB DIMM. Your printer comes with one free DIMM slot.
Installing a DIMM
Note
It’s very important to protect the printer controller board and any
associated circuit boards from electrostatic damage. Before performing
this procedure, review the antistatic caution on page 136. In addition,
always handle circuit boards by the edges only.
1
Turn off the printer and discon-
nect the power cord and inter-
face cables.
2
Using a screwdriver, remove the
screw. Then, slide the rear cover
to the right and remove it.