manualshive.com logo in svg

Konica Minolta Magicolor 5440 dl, User Manual, Page: 140 / 164

Share
Download
Konica Minolta Magicolor 5440 dl User Manual Download Page 140

Status, Error, and Service Messages

130

Error Messages (Operator Call)

This message...

means...

do this...

COVER OPEN 
DUPLEX

The duplex cover is 
open.

Close the duplex cover.

COVER OPEN 
FRONT

The printer’s front 
cover is open.

Close the front cover.

COVER OPEN 
SIDE

The printer’s right 
side cover is open.

Close the right side 
cover.

COVER OPEN
TRAY 

X

The right side cover 
of Tray 

X 

(Tray 2 or 

3) is open.

Close the right side 
cover of the tray.

DRAWER OPEN
TRAY 

X

The specified tray 

X 

(Tray 1, 2 or 3) is not 
installed, or not 
closed.

Insert the tray into the 
media feed unit.

DUPLEX OPTION
NOT ATTACHED

Duplex printing was 
specified with the 
printer driver, but the 
duplex option is not 
installed.

Stop the print job and 
change the printer driver 
setting. If necessary, 
install the duplex option.

ERROR
MEMORY OVERFLOW

The printer has 
received more data 
than can be pro-
cessed with its inter-
nal memory.

Turn the printer off, and 
then, after a few sec-
onds, turn it on again. 
Decrease the amount of 
data to be printed (for 
example, by decreasing 
the resolution), and then 
try printing again.

If that doesn’t solve the 
problem, install an 
optional memory mod-
ule.

ERROR
VIDEO UNDERRUN

The amount of data to 
be printed exceeds 
the printer’s internal 
data transmission 
speed.

Turn the printer off, and 
then, after a few sec-
onds, turn it on again. 
Decrease the amount of 
data to be printed (for 
example, by decreasing 
the resolution), and then 
try printing again.

Summary of Contents for Magicolor 5440 dl





































































































































































Reviews:

No comments