Konica Minolta CA-410 Series, Instruction Manual

Page: 94 / 140

92
Performing User Calibration
5. Setting an ID
Names can be applied to calibration channels.
Memo
By default, the channel number is set as the name.
Operating Procedure
1
While the measurement screen is
displayed, press the [MENU] key.
The setting screen is displayed on the LCD screen.
2
Press the [UP] or [DOWN] key to select
[User Calib], and then press the [RIGHT]
or [ENTER] key.
MENU
Trigger mode 0-cal AUTO
Meas Cond
User Calib
Target
Option
System
Measure and Register
Copy and Register
Edit Correction Coef
Set ID
Delete Calib Data
3
Press the [UP] or [DOWN] key to select
[Set ID], and then press the [RIGHT] or
[ENTER] key.
MENU
Trigger mode 0-cal AUTO
Meas Cond
User Calib
Target
Option
System
Measure and Register
Copy and Register
Edit Correction Coef
Set ID
Delete Calib Data
4
The screen for selecting a probe is
displayed. Press the [UP] or [DOWN] key
to select a probe and then press the
[RIGHT] or [ENTER] key.
MENU
Trigger mode 0-cal AUTO
Meas Cond
User Calib
Target
Option
System
10
09
08
07
06
05
04
03
02
01
▶ Measure and Register
Copy and Register
Edit Correction Coef
Set ID
Delete Calib Data
5
The screen for selecting a calibration
channel is displayed. Press the [UP] or
[DOWN] key to select a channel.
User calib > Set ID > Select CH
CH00
CH01
CH02
CH03
CH04
CH05
CH06
CH07
CH08
CH09
01
MENU