Konica Minolta CA-410 Series, Instruction Manual

Page: 119 / 140

117
Setting the Date Format
The instrument contains an internal clock to record the measurement date and time.
Set the display format of this date and time.
Operating Procedure
1
While the measurement screen is
displayed, press the [MENU] key.
The setting screen is displayed on the LCD screen.
2
Press the [UP] or [DOWN] key to select
[System], and then press the [RIGHT] or
[ENTER] key.
MENU
Trigger mode 0-cal AUTO
Meas Cond
User Calib
Target
Option
System
ON[10 min ]
2017/11/05
yyyy/mm/dd
OFF
9600
ON
English
Power Save mode
Date/Time
Date Format
Bluetooth
RS-232C baud rate
DHCP
Language
Instrument Info
Initialize
3
Press the [UP] or [DOWN] key to select
[Date Format], and then press the
[ENTER] key.
MENU
Trigger mode 0-cal AUTO
Meas Cond
User Calib
Target
Option
System
ON[10
min
]
2017/11/05
yyyy/mm/dd
OFF
9600
ON
English
Power Save mode
Date/Time
Date Format
Bluetooth
RS-232C baud rate
DHCP
Language
Instrument Info
Initialize
4
Press the [UP] or [DOWN] key to select
the desired date format, and then press
the [ENTER] key.
MENU
Trigger mode 0-cal AUTO
Meas Cond
User Calib
Target
Option
System
◉ y
yyy/mm/dd
○ dd/mm/yyyy
Power Save mode
Date/Time
Date Format
Bluetooth
RS-232C baud rate
DHCP
Language
Instrument Info
Initialize
5
Press the [ESC] key twice.
The measurement screen is displayed on the LCD
screen.
The date format setting will be kept even if the
POWER switch is set to OFF (
 ).
CA
-DP40
Set
tings