background image

76

Setting the Interval Alert

6

Press the [UP] or [DOWN] key and the 
[RIGHT]/[LEFT] keys to set a threshold, 
move to [Complete], and then press the 
[ENTER] key.

*  The threshold can be set to between 0.1 to 

100.0%.
If the entered value is out of the available range, 
an alert screen is displayed. Press the [ENTER] key 
to return to the previous screen and reset the 
value.
Press the [ESC] key to cancel configuration of the 
setting and restore the original value.

MENU

Trigger mode 0-cal AUTO

   

Meas Cond

   

User Calib

   

Target

   

Option

   

System

◉ 

ON [ 50 %]

○ OFF

  

Sync Mode

Meas Speed

Trigger Mode

Interval Meas

Interval Alert

JEITA freq resolution

Interval Alert threshold

Set the threshold value for the rate of 

change

Complete

050.0

 %

Input Error

The input data is incorrect

Input correct value

OK

7

Press the [ESC] key twice.

The measurement screen is displayed on the LCD 
screen.
The interval alert setting and value will be kept even 
if the POWER switch is set to OFF (

).

Summary of Contents for CA-410 Series













































































































































Reviews: