79
Selecting a Probe No.
Measurement will be performed simultaneously using all connected probes.
Follow the procedure given below to select the probe connector No. (P1 to P10) to which the desired probe is connected.
In this example, probes are connected to probe connectors [P1], [P3], and [P5].
P5
P3
P1
How to Select
On the measurement screen, press the [UP] or [DOWN] key to display the probe No. to be
selected.
Each time the key is pressed, the probe No. switches in the order of [P1] -> [P2] -> [P3].
The probe information is displayed in the instrument information area.
* By default, the number is set to [P1] when the POWER switch is set to ON ( | ).
CA
-DP40
Measur
ement
Pr
epar
ation
Summary of Contents for CA-410 Series
Page 12: ......
Page 40: ......
Page 139: ......
Page 140: ...En 9222 AA1J 12 2017 KONICA MINOLTA INC BIFBDA...