Konica Minolta AccurioLabel 230, Quick Manual, Page: 97 / 194

AccurioLabel 230 4-29
4.4 Replacing the media core 4
4.4 Replacing the media core
This section describes how to replace the media core of Roll Winder RW-210 .
-
To replace the media when the print job is finished
-
To replace the media when the winding diameter reaches the maximum value 500 mm / 19.69"
-
To replace the media when removing the media wound being misaligned
NOTICE
Before taking the media from Roll Winder RW-210 , make sure that this machine is stopped.
4.4.1 Set the media core to the rewinder spindle
Before setting the media core to the rewinder spindle , prepare the following items.
-
Scissors
- Masking tape (more than 30 mm / 1.18" in width)
-
Ruler
-
Lifter
1
Press [Stop] on the "Run" screen on the touch panel.
The "Stop" screen is displayed.
Be sure to switch to the "Stop" screen before making the operation.